preliminary ESD50V12L low capacitance tvs diode array publication order number: [ ESD50V12L ] ? bruckewell technology corporation rev. a - 2014 features ? transient protection for high speed data lines to ? iec 61000 - 4 - 2 (esd) 15kv (air), 8kv (contact) ? iec 61000 - 4 - 4 (eft) 40a (5/50ns) ? iec 61000 - 4 - 5 (lightning) 0.5kv, 12a (8/20s) ? array of surge rated diodes with internal tvs diode ? protec ts two i/o lines ? operating voltage: 12 volts ? low capacitance (5pf typical) for high - speed interfaces low clamping voltage solid - state silicon - avalanche technology ? rohs compliant package m echanical d ata ? jedec sot - 143 package ? ul 497b listed moldin g compound flammability rating: ul 94v - 0 ? packaging : tape and reel per eia 481 rohs/weee compliant application ? adsl ? industrial electronics ? rs - 422 interfaces ? portable electronics ? microcomputer input protection ? lan/wan equipment ? adsl packin g & order information shipping 3, 000/reel schematic & pin configuration sot - 143
preliminary ESD50V12L low capacitance tvs diode array publication order number: [ ESD50V12L ] ? bruckewell technology corporation rev. a - 2014 maximum ratings and electrical characteristics maximum ratings (tc=25c unless otherwise noted) symbol parameter value unit ppk peak pulse power (tp = 8/20s) 500 w ipp peak pulse current (tp = 8/20s) 16 a vfp peak forward voltage (if = 1a, tp=8/20s) 1.5 v maximum ratings (tc=25c unless otherwise noted) symbol parameter value unit tj lead soldering temperature operating temperature storage temperature 260 (10sec) c tl - 55 to +125 c tstg - 55 to +150 c electrical characteristics (tc=25c unless otherwise noted) p arameter conditions symbol value unit typical max reverse stand - off voltage reverse breakdown voltage reverse leakage current clamping voltage vrwm 13.5 12 v it = 1ma vbp v vrwm =12v, t=25c ir 1 a ipp = 5a, tp = 8/20s vc 24 v clamping voltage ipp = 16 a, tp = 8/20s vc 50 31 v junction capacitance between i/o pins and ground vr=0v,f=1mhz cj 5 10 pf between i/o pins vr =0v,f=1mhz 3 pf
preliminary ESD50V12L low capacitance tvs diode array publication order number: [ ESD50V12L ] ? bruckewell technology corporation rev. a - 2014 disclaimer all product, product specifications and d ata are subject to change without notice to improve reliability, function or design or otherwise. bruckewell technology inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, bruckewell), disclaim any an d all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any partic ular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, bruckewell disclaims (i) any and all liability arising out of the application or use of any product. (ii) any and all liability, including without limitation special, consequential or incidental damages. (iii) any and all implied warranties, including warranties of fitness for particular purpose, non - infringement and merchantability. statements regarding the suitability of products for certain types of applications are based on bruckewells knowledge of typical requirements that are often placed on bruckewell products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. parameter s provided in datasheets and/or specifications may vary in different applications and performance may vary over time. product specifications do not expand or otherwise modify bruckewells terms and conditions of purchase, including but not limited to the warranty expressed therein.
|
